Length-Motion-Position-Wire Sensor-Draw Wire
ACCELERATION -- 4-20mA VIBRATION SENSORS -- TILT -- SHOCK SENSORS --- FORCE -- TORQUE TRANSDUCERS -- WEIGHING COMPONENTS-- PANEL METERS -- DIN RAIL TRANSMITTERS -- LOAD CELLS -- CABLE TRANSDUCERS -- POSITION TRANSDUCERS --- INCLINOMETERS --- LOW COST LOAD CELLS -- - ATEX  APPROVED ACCELEROMETERS --- ATEX APPROVED LOAD CELLS --- PLEASE CONTACT NTT on FAX. +45 98 58 18 66  or  E-MAIL: ntt@ntt.dk

 

 

 

 

HIGH QUALITY alternatives for replacement of following Celesco products all with more than 10 times life time on potentiometers & much higher Quality & accuracy, Please ask for type and price !

SP1-SP2 &SP3 Series

PT8000 Series

 

 

 

 

 

PT5A SERIES

 

 

 

 

 

 
                 

                SERVICE  Life >2mill strokes

 High accuracy high life potentiometer used on all types !
Please take a look at all the sensors on  KS SENSORS
 
           Model Alternative:

KS-14, KS15, KS16, KS18, KS20,KS30, KS40 & KS50

Do cover ranges from 0-400mm to 0..1500mm

Output: as 0-5kOhm, 0-10kOhm or 4-20mA, 0-5V & 0-10Volt

  

AWP 404  0...1000mm, 0...4000mm Analog & CANopen options,

can also be delivered with Redun dant output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model Alternative to heavy duty industry types: 

Model HPS-M1/HPS-L

 

 
 

Model HPS-M1xxxxx do cover ranges from 0-500mm to 0..4000mm

Output: as 0-5kOhm, 0-10kOhm or 4-20mA, 0-5V & 0-10Volt, 3 different types of Pot. meter life time, the wire are presented on the inner drum by smart roller principle with much less wear than on other types as  PT5     n on 
 
 
 
 
Model HLS-M work with encoder signals from 1000mm to 5000mm with different resolution from 1pulsmm to 1 per 005mm

 Incremental Linear Wire encoders  HLS-M     for fast response actions 

           PDF Data on  all different types of HONTKO Sensors

HPS-S 500mm -- 1000mm 5kOhm resistance

HPS-M1 500mm -- 4000 mm Outputs:  mA   Volt   Ohm

HPS-L 3000mm -- 8000 mm Outputs:  mA   Volt   Ohm

& Incremental Linear Wire encoders  HLS-M for fast response actions  

 

                           

 

 Heavy duty industry types: Model MS601-603 Based on ø1.3mm High Tenacity Wire rope

Model MS600  xxxxx due cover ranges from 0-1000mm to 0..5000mm

Output: 4-20mA  2 or 4 wire, 0-5Volt / 0-10Volt, or 5kOhm/10kOhm.

 The wire are presented on the inner drum by smart roller principle with much less wear than on other types as  a PT5,  IP65 protection. Can also be delivered with Encoder output !!

                                    

 

Model AWP 703 Alternative  Wire rope, magnetic absolute encoder = NO POTENTIOMETER 

 3000mm working range, programmable working range based on Voltage or 4-20mA outputs. IP 67 Protection, 0.05mm resolution, 1m/s speed

CANopen output at fixed max. 3000mm Magnetic absolute encoder  500Hz

 AWP 110 HR 1200mm working range, programmable working range based on Voltage or 4-20mA outputs. IP 67, 0.05mm resolution, 2m/s speed       

MS600  series   Long Life Sensor Service life > 2 Mio Strokes

 

Long Life Sensor Service life > 2 Mio Strokes

MS901-9000mm

 
 
 
 

                 MS902   Base unit

 

          

PT9510 / 9420 Series

PT9000 SERIES

 

Model Alternative to heavy duty industry types: Model MS901-905 Based on ø1.3mm High Tenacity Wire rope

Model MS900  xxxxx due cover ranges from 0-10m to 0..50m

Output: 4-20mA  2 or 4 wire, 0-5Volt / 0-10Volt, or 5kOhm/10kOhm.
 The wire are presented on the inner drum by smart roller principle with much less wear than on other types as  a PT5,  IP65 protection. Can also be delivered with Encoder output !!

                 

 
PLEASE ASK US FOR RELEVANT DATA SHEETS ON ntt@ntt.dk 

MORE PRODUCTS NEXT PAGE

 

 

 
Send mail to ntt@ntt.dk with questions or comments about this web site.
Copyright © 2023 Nordisk Transducer Teknik
Last modified: maj 04, 2023