Direct To Sensor Data Acquisition with DASYLab 

now with USB2 connection & new inet555 rack system

instruNet
instruNet Topology

instruNet is a new family of data acquisition hardware that provides ten's of microVolts of absolute accuracy instead of ten's of milliVolts, at the same cost, and at the same throughput rates as the typical general purpose data acquisition board. It does this with a completely different topology where the analogue electronics are put close to the sensor in electrically quiet boxes outside of the computer, and the noisy digital electronics are left inside the computer. The external boxes contain signal conditioning amplifiers for each channel, and can therefore directly attach to sensors such as thermocouples, RTD's, strain gauges, resistance sources, current sources, and voltage sources; and return engineering units (e.g. "Volts","Amps"). The system is called "instruNet®", which is "A Network Approach to Instrumentation". At the heart of the real-time network is a USB  controller board that plugs into a Windows XP/Vs/7 computer. The controller communicate via USB 2.0 High speed ( 480M bits/sec) . All real-time tasks are off-loaded to this processor, therefore the host computer is not burdened with real-time issues. The instruNet 100 Network Device, pictured at the top of this page (the long black box with BNC connectors), provides a world of connections of different kind of transducers and sensors making the system very flexible

Go direct to Instrunet USB Data Acquisition information pages

Wire Directly to Common Sensors
Via Universal Screw Terminals

 

 

BOXES/RACK UNITS POWERED BY 32BIT DSP PCI OR PC-CARD OR USB2 CONNECTION

INCLUDE STRIP CHART/OSCILLOSCOPE SOFTWARE

PROGRAMMABLE FROM C, VISUAL BASIC, TESTPOINT, HP VEE, DASYLAB, ORGIN, MICROLAB, FAMOUS, & SUPERSCOPE II. LABVIEW DRIVERS AVAILABLE

 

 

Click on the picture to go direct to Instrunet pages with relevant informations

Inet400 rack system for individual tailor made hardware system which fit to you configuration.


InstruNet hardware is 100% supported by Dasylab software as an integrated part.

Dasylab software for data Acqusition Systems

[Home][What's New][Products & Services][Feedback]

Send mail to ntt@ntt.dk with questions or comments about this web site.
Copyright © 2014 Nordisk Transducer Teknik
Last modified: juli 25, 2015