INCLINATION & ACCELERATION                    

ACCELERATION -- 4-20mA VIBRATION SENSORS -- TILT -- SHOCK SENSORS --- FORCE -- TORQUE TRANSDUCERS -- WEIGHING COMPONENTS-- PANEL METERS -- DIN RAIL TRANSMITTERS -- LOAD CELLS -- CABLE TRANSDUCERS -- POSITION TRANSDUCERS --- INCLINOMETERS --- LOW COST LOAD CELLS -- - ATEX  APPROVED ACCELEROMETERS --- ATEX APPROVED LOAD CELLS --- PLEASE CONTACT NTT on FAX. +45 98 58 18 66  or  E-MAIL: ntt@ntt.dk  

Supplied in all Nordic countries

by: Nordic Transducer  Denmark

SEIKA-Products                   

 

Static accelerometers (lower working frequency: 0 Hz)

*  Model Range Resolution
B1 / B2 / B3 ±3g / ±10g / ±50g (1g=9,81ms-2 <0,001g / <0,005g / <0,01g

 
BA1 / BA2 / BA3

9-30VDC power supply, with 0.5-4.5VDC output

 ±3g / ±10g / ±50g (1g=9,81ms-2

Very high overload resistance 10000g

 <0,001g / <0,005g / <0,01g

 

Static accelerometers (lower working frequency: 0 Hz)

Dansk Information vedr. DC / Statisk acceleration m.m.  

*  Model Range Resolution
 

SB1i-B

 
from ± 0.1g ... ±50g  from DC ... 1,5 kHz depending of sensor
Sensor box ( 98 x 64 x 56mm) with one  built in SEIKA-Sensors Type B1, B2, NB3 or BDK and  integrated current loop amplifier  with a 4...20mA output.
 
 
SB2i-B

(can also be implementet  with BDK sensors for Dynamic response)

 

 
from ± 0.1g ... ±50g  from DC ... 1,5 kHz depending of sensor
Sensor box ( 98 x 64 x 56mm) with 2  built in SEIKA-Sensors Type B1, B2, NB3 or BDK and 2 galvanic separeted  integrated current loop amplifier  with 2 x  4...20mA outputs.

                  NOW ALSO AS Ex ia IIC T4
SBG3i

(can also be implemen- ted with BDK sensors for Dynamic response)

 

 

 

SBG3u

3 axis with volt output
3 axis 
from ± 0.1g ... ±100g  from DC ... 1,5 kHz depending of sensor
Sensor box ( 123 x 78 mm) with 3 built in SEIKA-Sensors Type B, BD or BDK and tree integrated current loop amplifiers each with a 4...20mA output. All channels are galvanic separated from each other. 
 

 

 
      
 
 
New model SBG3u available with Volt output 0.5..4.5Volt or +/- 4Volt
XB3I SBG3i  

Saltwater and corrosion-proof stainless steel housing (IP68..IP69K) for up to 10 bar pressure ( 100m H2O)

 

   

Dynamic accelerometers (lower working frequency: 1 or 10 Hz)

*  Model Range Resolution Working frequency
BD3 / BDK3 ± 3 g < 10-3 g 1 / 10 ...300 Hz
BD10 /BDK10 ± 10 g < 5*10-3 g 1 / 10 ... 800 Hz
BD100/BDK100 ± 100 g < 1*10-2 g 1 / 10 ... 1,5 kHz

Inclinometers

* Model Range COMMENTS
NB2 / NB3  ±2° ±10° (±20°) <0,001°
N2 / N3 / N4 ±10° / ±30° / ±70° <0,002° / <0,005° / <0,01°
NA2..3..4 ±5°/ ±10°/±30° /±45° ±70° New small size type with build in excitation,  2.5V zero +/-2V on range  
NBA ±2° / ±10° New small size type with build in excitation,  2.5V zero +/-2V on range <0,001° / <0,01° 
NG2..3..4 ±10° / ±30° / ±80° <0,001° / <0,003° / <0,01°
NG..I NG2/3/4-type with internal 4...20mA current-loop amplifier
NMXi

Stainless Steel housing, small size

 ±5° to  ±80° with  4...20mA current-loop amplifier, IP67

 
NG..U NG2/3/4-Type with internal 0,5..4,5 Volt Voltage amplifier
NG360

SB360

 360 degree Digital inclinometer RS485

360 degree Digital inclinometer RS485 in IP65 box
SC485B RS232/485 converter
SB1M  +/-5 to +/- 80 degree Digital inclinometer RS485 Modbus interface, adapters or RS232 or USB2


Signal conditioners ( suited to all SEIKA-sensors )

* Model Signal output
NV4a -4 ... 0 ...+4 Volt
NV6a 4 to 20mA
NV8a 0 to 5 Volt

Sensor boxes Inclination

*  Model Signal output
SB1i

 

Sensor box ( 98 x 64 x 56mm ) with one built in SEIKA-Sensor of various Types and with integrated current-loop amplifier for 4...20mA Output

Have a look at one of many solutions based on SB1i Inclinometers 
SB2i
Inclinometer X Y.
Sensor box ( 98 x 64 x 56mm ) with two built in SEIKA-Sensors Type   N, NB and two integrated current loop amplifiers each with a 4...20mA output. Both channels are galvanic separated from each other .

  NOW ALSO AS Ex ia IIC T4

SB1U Sensor box ( 98 x 64 x 56mm ) with one built in SEIKA-Sensor of various Types and with integrated Voltage amplifier for 2.5V +/-2 Volt Output.
SB1S Sensor box ( 98 x 64 x 56mm ) with one built in SEIKA-Sensor of various Types and with integrated Voltage amplifier for 0...5Volt Output and also two Open Collector outputs, both with adjustable set-point limits
SB2G Sensor box ( 124 x 80 x 58mm ) with two built in SEIKA Sensors Type NG and two 2.5V +/-2 Volt  outputs.

accessories

SW3 Sensor-cube for mounting of up to 3 SEIKA-Sensors Type: B, BD,BDK,N    
XB1..2 Stainless Steel housing for all  SB1 & SB2  sensor boxes

Please also take a look at :  www.Inclinometer.eu

 


Nordic Transducer

Als Odde, DK 9560 Hadsund Denmark------ --- -- ----- 

Tel.: +45 98581444 ,                              

e-mail ntt@ntt.dk

[Home][What's New][Products & Services][Feedback]